Ever wondered what’s that squeaky sound within your chair that causes a sudden distraction while you’re trying to focus real hard on your screen?
Well, that possibly be due to the damaged seals that cannot retain the pressure anymore. But, that doesn’t mean you should replace the cylinder or switch your chair, as there are still ways to get rid of that office chair popping sound.
Certainly, the squeaky noise of your chair can be quite an annoyance for your ears, as well as for the people in your surroundings. However, little did you know that the office chair popping sound is not an indication to buy the new chair instead; its fixing solutions are pretty easy!
Therefore, if you are facing the same issue with your favorite office chair, hook on to this page now because we are going to discuss some major reasons that produce the popping sound along with convenient and elementary methods.
Contents
Causes of the Office Chair Popping Noise
That gruesome squeak that arises from your office chair every time you make slight movements is indeed awful. And do you know why these office chairs generate such a rattling sound?
It is because most of these noises are caused by attrition on the washers that retain the ball bearings, as well as the necessity to grease the chair’s moving parts. It’s a good idea to double-check that your chair’s hydraulics are in good functioning order. More reasons include;
- Unfastened screws
- Misaligned spring
- Broken chair wheels
- Leg sagging
- Rusted components
- Lack of Lubrication
Check for the Source
Now that you are aware of the factors causing your chair to produce weird sounds, your next step is to look for the source from where it originates.
- Lean back on the chair
- Spin around
- Push yourself sideways
- Change your postures
- Place your chair on a hard and smooth surface.
Moreover, switch the seat cushioning while sitting on it and scrutinize every corner to ensure the true place of origin. These practical ways of examination will help you to identify the root of the office chair popping sound.
Once you have got done with this, move on to the techniques to clear out the mini trouble in your chair.
How to Fix an Office Chair Popping Noise?
We understand that experiencing noises with every movement while performing a task can be bothersome, affects your productivity, and may also lead to significant long-term consequences. The major problem with office chair popping noises is that most people don’t know how to fix them and this is because they are too lazy to learn and accomplish it on their own.
Thus, if you don’t want to ruin your valuable chair with your little knowledge, below are a few steps that may lend you some help to fix the popping noise.
Step 1: Take away the Wheel Base
Remove the chair’s wheelbase to have access to the washers and other moving elements that require repair. Flip the chair over and secure it against a wall.
Step 2: Examine and Replace the Washers
Examine the washers to see whether they are worn. If they are, you can usually just flip them over because the opposing side is not fatigued. If the whole part is damaged, it must be replaced.
Step 3: Apply any Lubricant/Oil
A dry-silicone lubricant like WD-40 works like magic to remove the popping sound. Though it may stink for a few hours, it stops squeaking for months or years.
Other than that you can also use 3-1 oil, commonly known as a light machine or sewing machine oil. It’s a touch more difficult to apply in the appropriate places, but it’s slightly thicker, gets more oil in, and smells less.
Note that any lubricating oil will do the job yet you should avoid using motor oil because its scent may linger for weeks in your chair.
Step 4: Reassemble the chair
After you’ve oiled all of the chair’s moving parts, you may reattach the wheelbase to the bottom. You may need to tighten nuts and screws as you reinstall the wheelbase to ensure it is firmly attached. When everything is firmly adjusted, flip the chair back over and verify it physically.
The DIY Methods
Secure Screws and Bolts
Search for the loose bolts and tighten them with the help of a screwdriver. Don’t try to lock the bolts with your hands because it might not be that effective, however, after you are done tightening, run your fingers in it for a recheck.
Substitute the rusted components.
Even though bathing the metal pieces in vinegar does not remove the rust, it is time to replace the rusted parts. Yes, you do not have to replace the existing swivel chair because the parts are easily accessible at any hardware store.
Glue it on
Besides lubricant, glue can be used to repair broken parts. Damaged armchairs can make an irritating noise and have sharp edges that can harm your arm, thus a strong adhesive, such as wood glue, will suffice. Make certain that you have indicated the proper location for applying glue.
Make use of a hose clamp
To avoid sinking, clean the cylinder, wrap it in duct tape, and secure the hose clamp to it.
Utilize a PVC pipe
Slice it up vertically, and gently press it against the cylinder till it coils around. As a result, it will automatically prevent the chair from sinking.
Wrap Up
Surprisingly, that infernal sound of your chair is one of the few factors creating a hindrance to your productivity. And rightly so, you truly want to eradicate it as soon as possible. Therefore, to deal with your urgency, the above methods to remove office chair popping noise are actually the best ones so far. Apply any of it now, before the chair’s condition gets more critical!
Leave a Reply